Payment & Shipping Terms:
|Product Name:||Car GPS Tracker||Network:||GPRS GSM|
|Band:||850/900/1800/1900MHz||GPS Chip:||High Quality GPS Chip|
|GPS Accuracy:||<5M||Application:||Fleet Management System|
|GPS Sensitivity:||-159dBm||Alert:||Overspeed Alert|
car gps locator,
automobile gps tracker
Car GPS Tracker TK103 Position Track Fleet Management System
1. Main Functions
A. Positioning and Tracking
B. Triggering Emergency Alarm
C. Remote controlling oil and circuit
D. Remote Monitoring
E. Auto Track
F. Mileage statistics
G. Ignition Detection
H. Support Fuel Temperature Sensor
I. Voice Monitoring
J. SOS Alert
|Operation Temp.||-20°C to +70°C|
|Storage Temp.||-40°C to +85°C|
|Standby work current||< 30mA|
|Battery||Chargeable changeable 3.7V / 1.2Ah Li-ion battery|
|Time To First Fix||
Cold status 45s
Warm status 35sHot status 1s
CA-V1 tracker should be installed by technical professional of local service centre. Without permission, the user cann’t repair and move the tracker randomly. If users do, any unfortunated damage should be compensated by himself.
(caution: the following installation should under no power, otherwise will be dangerous)
1. Power supply line:
The red wire connects 12V“+”;Black wire connects to 12V“-”
2. Wire for cutting off oil of the tracker
Yellow wire connects the relay pin 86; 85 pin connect to 12 V DC , 87 pin and 30 pin in series power supply fuel. Caution: Wrong connection of yellow wire will damage the tracker.
3. Wire for cutting off circuit of the tracker
White wire connects relay pin 86; 85 pin to 12 V DC, 87 pin and 30 pin are in series power supply circuits. Caution: Wrong connection of yellow wire will damage the tracker.
4. Emergency triggering alarm
The blue wire connects the positive of the alarm button, and the black wire connects the negative of the alarm button.
4. Main Functions Commands
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district.
Set up: The user can Send SMS “stockade + password + space + MinLatitude, MinLongitude; MaxLatitude, MaxLongitude” to unit to set the restricted district. In case of breach, it will send SMS “stockade! + geo-info” to the authorized numbers.
For example send SMS “stockade123456 22.548123, 114.081234; 22.549123, 114.082234” to the unit.
Remark: The first latitude & longitude is coordinate of min of the Geo-fence, while the second latitude & longitude is the coordinate of the max. It will alarm one time in each setting.
Cancel: Send SMS “nostockade + password” to deactivate this function.
This function will be out of effect after the unit moves outside the district.
B. Auto Track
Report a Geo-info at 30 seconds intervals to the online position platform for 5 times: Send SMS “at30sum5” to the device. The max intervals is 65535 seconds. You can send “at30sum0” for heaps of times to platform.
Send“noat123456” to the tracker, the tracker will stop transmitting the data to the platform.
If the platform support this function, it can be operated on the platform straightly.
C. Set APN
In order to send GPS data to IP address, you still must set mobile network Access Point Name (APN). If you don’t know the APN, you can consult local network service supplier. The format of set APN is “apn + password +space + APN”. For example you send SMS “apn123456 cmnet” to the device. The device will reply SMS “Set APN ok.”
5. Platform Control Engine
6. Mileage Report
Contact Person: Bryant