 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Network: | GSM GPRS GPS | Protocol: | GT06 |
|---|---|---|---|
| Application: | Car Vehicle Motorcycle E-bike | Input Voltage Range: | 9-90V |
| Battery: | 50 Mah Rechargeable Li-ion Battery | Relay: | DC12V / 24V Relay |
| GPS Module: | TD1030 | ||
| High Light: | car gps locator,automobile gps tracker |
||
G17H Sell To Indian GPS Tracker With Cheapest Price Have Relay Fuctions
Car GPS Tracker G17H With G-sensor BS250E And 9-90V Wide Input Voltage
1. Specification:
| 14 | Check heartbeat data status | HBT# | |
| 15 | GPS DATA upload time interval |
TIMER,T1,T2# T1=0,5～18000seconds; ACC ON time interval ACC OFF time interval |
|
| 16 | Check time interval | TIMER# | |
| 17 | Control Relay |
RELAY,A# 0 stands for on 1 stands for off |
|
| 18 | Check Relay status | RELAY# | |
| 19 | Open Vibration alert |
SENALM,A,M# A=ON M=0～2 alert methods 0 stands for only GPRS 1 stands for SMS+GPRS 2 GPRS+SMS+CALL |
|
| 20 | Close Vibration alert | SENALM,OFF# | |
| 21 | Check Vibration alert status | SENALM# | |
| 22 | Open power off alert |
POWERALM,A,M,T1,T2,# 0 stands for only GPRS 1 stands for SMS+GPRS 2 GPRS+SMS+CALL T1=2～60seconds detect power off time T2=1-3600seconds the minimum charge time |
|
| 23 | Close power off alert | POWERALM,OFF# | |
| 24 | Check power off alert status | POWERALM# |
2. G17H GPS Tracker Function:
G17H parameters
G-sensor : BS250E
input power: 9-90V
power IC: SL3036H
GSM module: MT6261
GPS module: TD1030
3. Product Appearance:
The specific contents are determined by the protocol numbers corresponding to different applications.
The serial number of the first GPRS data (including status packet and data packet such as GPS, LBS) sent after booting is ‘1’, and the serial number of data sent later at each time will be automatically added ‘1’.
| Type | Value |
| Login Message | 0x01 |
| Location Data | 0x12 |
| Status information | 0x13 |
| String information | 0x15 |
| Alarm data | 0x16 |
| GPS, query address information by phone number | 0x1A |
| Command information sent by the server to the terminal | 0x80 |
A check code may be used by the terminal or the server to distinguish whether the received information is error or not. To prevent errors occur during data transmission, error check is added to against data misoperation, so as to increase the security and efficiency of the system. The check code is generated by the CRC-ITU checking method.
The check codes of data in the structure of the protocol, from the Packet Length to the Information Serial Number (including “Packet Length” and “Information Serial Number”) , are values of CRC-ITU.
CRC error occur when the received information is calculated, the receiver will ignore and discard the data packet.
Fixed value in HEX 0x0D 0x0A.
The commonly used information packages sent by the terminal and those sent by the server will be interpreted separately.
Login Message Packet
The login message packet is used to be sent to the server with the terminal ID so as to confirm the established connection is normal or not.
| Format | Length(Byte) |
| Start Bit | 2 |
| Packet Length | 1 |
| Protocol Number | 1 |
| Information Content | N |
| Information Serial Number | 2 |
| Error Check | 2 |
| Stop Bit | 2 |
Car GPS Tracker G17H With G-sensor BS250E And 9-90V Wide Input Voltage
Gurantee:
1. All of our product is free to use the Tracking service server in 24 hours each day
2. All of our product there is a 2 year quanlity assurance.
Product Configuration:
1. Standard configuration
1) Portable GPS Device 1 pcs
2) Power lines 1 pcs
Contact Person: Bryant
Tel: +86-13560742132
Fax: 86-0755-29437724
