Payment & Shipping Terms:
|Product Name:||Fuel Sensor GPS Tracker||Application:||Mixer Truck|
|15CM Cable Tie:||Used To Fix The Extention Wire||1.2M Cable Tie:||Used To Fix The Probe|
|Working Temperature:||-30℃~+75℃||Measurement Accuracy:||±0.5%;|
|Maximum Power Consumption:||0.4W/12VDC||Measurement Resolution:||0.1mm|
|Inbreaking Protection:||IP66||Liquid Level Value Unit:||Millimeter|
|Peripheral Interface:||RS232 / RS485 / Analog Transmission||Working Humidity:||5%~90%.|
1. Product Introduction
Ultrasonic fuel level sensor is a vehicle fuel monitoring device which is designed for the fuel management needs of company fleet. This sensor can be used to prevent the driver to steal fuel,optimize the operating costs,optimize the driver’s driving behavior and auxiliary statistical decision, etc. The sensor is equipped with a high precision ultrasonic probe, which can detect the fuel quantity in the fuel tank. Fuel quantity data will be sent to the server via GPS tracker,then generate the data report. Sensor support for serial and analog output, so, it can easily docking with other system.
|Standard parts list||Picture|
|Integrated type Probe||
|15CM cable tie||Used to fix the extention wire|
|1.2M cable tie||Used to fix the probe|
|Abrasive paper||Used to clean the bottom of the tank|
|1||Working Voltage||DC 9V~36V.|
|5||Maximum power consumption||0.4W/12VDC|
|8||Probe explosion-proof grade||Exia Ⅱ CT6 / Exd Ⅱ CT5|
|10||Liquid level value unit||Millimeter|
Depending on the material and thickness of the container.
if 5mm thick steel plate, the measurement range is 5~100cm.
|12||Peripheral interface||RS232 / RS485 / Analog transmission|
|13||Analog transmission||4~20mA current output|
|Baud rate 9600, no parity bit, 8 data bits, 1 stop bit, no flow control. Sensor will smooth the height and temperature values, and transmits them every 10 seconds.All datas can be customized.|
Resolution of sensor’s measurement for fuel height is 0.1mm.And its measurement accuracy is ±0.5%. It keeps higher accuracy even in highest or coldest outside environment.
Being different from direct-contact measurement like float-type,pressure-type,magnetic sliding-type, untrasonic fuel level sensor adopts non-contact measurement, which can avoid pollution and corrosion from fuel and keep stability in a long period of time.
3.Easy installment and maintenance.
You only need to install the sensor probe on lower surface of fuel tank. You don’t need to change its original measurement system or punch hole for it. Its original fuel meter operates as usual.
4.No pollution and lower consumption.
This non-contact measurement and non-punch hole for fuel tank can keep off pollution from fuel.
It can still work in harsh environment and it is damp-proof, acid-proof, flame-retardant, anti-interference,and intelligent.This product can be used independently to check fuel level data from auxiliary display unit. It seamlessly integrated with GPS tracker which sends fuel level data to host computer for statistics data collection, and perform analysis and query.
The ultrasonic fuel level sensor is used for digital recording vehicle refueling, to prevent driver stealing oil , avoid the waste of resources, improve operational efficiency, and improve the traffic safety, strengthen the operation and management level.
1. All of our product is free to use the Tracking service server in 24 hours each day
2. All of our product there is a 2 year quanlity assurance.
3. Sample fee will not be returned.
1. Standard configuration
1) main device 1 pcs
2) power line 1 pcs
5) Installation cables 1 set
6) Usage instructions
7) Warranty card
Contact Person: Arthur QI