Payment & Shipping Terms:
|Product Type:||Electronic Bike||Function1:||E-bike Anti-theft|
|Application:||E-bike And Motorcycle||Function2:||Geo Fence|
|Network:||2G GSM||Band:||Quad Band|
|Size:||6.7*3.38*1.15cm(L*W*H)||Function3:||Cut Off Engine|
|Tracking Way:||Mobile Phone APP|
Auto GPS Tracker,
Car GPS Tracking
Mini GPS Tracker Supports Wide Voltage Input For Electronic Bike
|1||GPS AND LBS Tracking|
Playback routes in a period
|3||Cut off engnie via relay|
|4||Check mileage report|
|1||GPS Positioning||Users can track their cars via our this device any time, the device is always uploading current positioning data to server according to the time interval you set.|
|2||Playback Routes||The history tracker data contains speed,acc status and mileage you moves and so on.|
|3||Setting Function Via SMS||Our device supports sms functions. so you can set many commands via sms.|
|4||Ignition Detection||The green line is ignition detection line, when you connect it to the ignition line of your vehicle, it will send the status to server.|
|5||Vibration Alarm||this device contains one vibration sensor for vibration alarm function.|
|6||Overspeed Alarm||this gps tracker device supports overspeed alarm function when the speed is more than value you set. it will alert.|
|7||Cut Off Engine||First you have to install one relay then you can control engine on or off via SMS commands.|
|8||Built-in Antenna||Built-in high tech of GPS/GSM antenna for easy installation.|
1. Fleet management
2. Motorbike Truck
3. Rental Car Company
4. Taxi Company
5. Insurance company
|Size||67(L) x 33.8(W) x 11.5(H) mm|
|Wide Voltage Input||DC9-80VDC|
|Positioning Accuracy||10 meters|
|GSM/GPS Antenna||Inner Antenna|
|Non-movement Detection||Movement Alert based on built-in 3D|
Green LED Flashing stands for GPS signal IS OK
Blue( Flashing stands for GSM Signal is ok)
|Power LED||Red (Flashing stands for unit works with built-in battery|
Steps of installation:
1. Please buy one 2G GSM SIM Card and open GPRS function
2. Open the back cover,insert a SIM card to SIM Card Slot.
2. Turn on battery switch the device starts to work.
3. Connect the power cable with the interface of device. Now theree LED lights will lighting. Make sure the
receiving side face up, without any metal object shelter. The LED lights will glashing after 1 to 5mins.
It shows working normally.
4. Close the back cover. Set the IP address and APN, if APN has user name and password, you have to send APN setting command.
5. Please ask professional technical to connect wires and install to the vehicle. After correct installation.
the REd LED will falshing, 1 min. Later the Blue Led will falshing too. That shows installing completely.
|Add Administrator No.1||#6666#AAD#1#Cell No#|
Contact Person: Arthur QI