Payment & Shipping Terms:
|Model Type:||GPS Tracker Device||Frequency:||Quad Band|
|Power Supply:||DC9V To 80V||Application:||Taxi And Truck|
Car GPS Tracker Device With Quad Band For Any Countries And Districts
|1||Check the current positioning via mobile phone app|
|2||Platform supports mileage statistics|
|3||Cut off engine via SMS commands|
|4||Playback history routes for more than three months|
|1||GPS Positioning||User can check the real time GPS positioning of the device. of course the device should work normally. The accuracy is less than 5 meters.|
|2||Playback Routes||According to your requirements, if you want to know the routes in one period, you can playback it.|
|3||Setting Function Via SMS||Our device supports sms functions. so you can set many commands via sms.|
|4||Ignition Detection||The green line is the ignition detection line. of course you have to connect it to the igniton line of your vehicle|
|5||Vibration Alarm||this unit have vibration sensor.|
|6||Overspeed Alarm||After you send the over speed alarm SMS commands. when it moves more than this speed, there will be alarm message to your mobilephone number.|
|7||Cut Off Engine||When you connect the yellow line to relay. we can control the engine on or off via sms command or send command via platform( For safety considering, it will not cut engine while speed is above 20km/h)|
|8||Built-in Antenna||Ceramic GPS antenna receives GPS satellite siganl|
1. Fleet management
2. Motorbike Truck
3. Rental Car Company
4. Taxi Company
5. Insurance company
|Dimension||67(L) x 33.8(W) x 11.5(H) mm|
|GSM/GPS Antenna||Inner Antenna|
|History track||more than 3 months|
1. Flash: GPS can receive satellite signal
1. Quick flash: uploading data
|Power LED||Red (Flashing stands for unit works with built-in battery|
Steps of installation:
1. Open the back cover,insert a SIM card to SIM Card Slot.
2. Switch power button up(Power on).
3. Connect the power cable with the interface of device. Now theree LED lights will lighting. Make sure the
receiving side face up, without any metal object shelter. The LED lights will glashing after 1 to 5mins.
It shows working normally.
4. Close the back cover.
5. Please ask professional technical to connect wires and install to the vehicle. After correct installation.
the REd LED will falshing, 1 min. Later the Blue Led will falshing too. That shows installing completely.
|Add Administrator No.1||#6666#AAD#1#Cell No#|